DecaLED® Driver TV 12/24

The DecaLED® Driver TV 12/24 was designed to control all dimmable 12 or 24VDC LED products. This driver is ideal for use in small, closed rooms and can only be used in combination with a separate 12 or 24VDC power supply.

The DecaLED® Driver TV 12/24 is a small driver which does not have its own power supply unit, which can be used to control a range of different LagoLED® and DecaLED® LED products. The DecaLED® Driver TV 12/24 can be equipped with a 12 VDC of 24 VDC power supply, depending on the LED product to be controlled. The DecaLED® Driver TV 12/24 has 24 separate channels. The maximum load of the driver is 3A per output and, in total, a maximum of 12A can be controlled by the driver. The driver measures 147 x 115 x 40 mm (l x w x h). You can use the DecaLED® Setup Tool to program the Driver to a DMX start address, or to run one of the 10 standard programs. The intensity and speed of these programs can be adjusted. Various accessories are available for the DecaLED® Driver TV 12/24, including starter cables, 12 and 24VDC power supply units and the DecaLED® Setup Tool.

The DecaLED® Controller 2 and DecaLED® Controller 2 Mini were developed as a solution with an integrated 12VDC power supply and driver.

The DecaLED® Controller 3, DecaLED® Controller 3 Mini and DecaLED® Controller 4 were developed as a solution with an integrated 24VDC power supply unit and driver.

Product information:

• DecaLED® Driver TV 12/24

Suitable for the following products requiring 12VDC:

• DecaLED® Flex RGB
• DecaLED® Flex RGB HD
• DecaLED® Flex SC
• DecaLED® RGB Strips
• DecaLED® SC Strips
• DecaLED® Dot
• DecaLED® Square
• DecaLED® IP Strip RGB
• DecaLED® IP Strip SC

Suitable for the following products requiring 24VDC:

• LagoLED® RGB Strip
• LagoLED® DEKO Panel
• LagoLED® Dance Floor
• DecaLED® Cove Flex RGB
• DecaLED® Cove Flex SC
• DecaLED® Cove Flex SC SE
• DecaLED® Neon Flex RGB