DecaLED® Dimmer for 12/24 VDC
The DecaLED® Dimmer for 12/24 VDC is an very elegant and simple dimmer for controlling LED lighting and is ideal for single colour LED installations that need to be dimmed.
The DecaLED® Dimmer for 12/24 VDC can be used to dim permanent installations with single colour LED lighting, without the use of a controller or driver. The dimmer is suitable for both 12 and 24 VDC input signals. The output signal can be reduced using the dimmer knob. The LED lighting can be dimmed to approximately 25% of the minimum light output, which for LED lighting, is often more than sufficient. The maximum load of the dimmer is 140W at 12VDC and 280W at 24VDC. The dimmer is suitable for both recessed and surface-mounted installation and is protected against overloading, short circuiting and overheating. The dimmer measures 60 x 60 x 59 mm (l x w x h) and must be fitted in a recess measuring 46mm in diameter and 35 mm in depth.
A range of accessories are available, including various 12 and 24 VDC power supplies.
Take care when using this dimmer, as it does not prevent dimmed LEDs from causing interference during TV-recordings! For this you must use a DecaLED® Controller.