DecaLED® Controller 3
The DecaLED® Controller 3 offers a solution for controlling all dimmable 24VDC LED products. The DecaLED® Controller 3 is ideal for use in small, closed rooms and combines a driver and power supply unit within a single housing.
The DecaLED® Controller 3 is a robust, professional LED controller, which can be used to control LED products that require a supply voltage of 24VDC. The DecaLED® Controller 3 can handle a maximum load of 12.5A, with a maximum of 3A per output. The controller measures 356 x 183 x 71 mm (l x w x h) and must be connected to a supply voltage of 230VAC. On the front of the DecaLED® Controller there several DIP switches, with these a DMX address or one of ten programs can be selected.
The DecaLED® Controller 3 is supplied with a remote control and an external infrared eye, which enables you to easily recall a number of standard programs or colours from the memory. The DecaLED® Controller 3 can of course also be controlled via DMX. For a professional connection of the DMX signal there are 6 different lengths of XLR cabling available. We offer a range of accessories for the DecaLED® Controller 3, including starter cables, spare remote controls, a spare infrared eye, and the DecaLED® Setup Tool.
In addition to the DecaLED® Controller 3, we also offer two other DecaLED® controllers for 24VDC products. The DecaLED® Controller 3 Mini, for smaller installations that require only a limited load, and
the DecaLED® Controller 4, for large-scale installations in which large lengths of LED lighting need to be connected to a single output.
Product information:
Suitable for the following products:
- LagoLED® RGB & SC Strip
- LagoLED® DEKO Panel
- LagoLED® Dance Floor
- DecaLED® Cove Flex RGB
- DecaLED® Cove Flex SC
- DecaLED® Cove Flex SC SE
- DecaLED® Neon Flex RGB