DecaLED® Controller 2
The DecaLED® Controller 2 offers a solution for controlling all dimmable 12VDC LED products. The DecaLED® Controller 2 is ideal for use in small, closed rooms and combines a driver and power supply unit within a single housing.
The DecaLED® Controller 2 is a robust, professional LED controller, which can be used to control LED products that require a supply voltage of 12VDC. The DecaLED® Controller can handle a maximum load of 14A, with a maximum of 3A per output. The controller measures 356 x 167 x 71 mm (l x w x h) and must be connected to a supply voltage of 230VAC.
On the front of the DecaLED® Controller there several DIP switches, with these a DMX address or one of ten programs can be selected. The DecaLED® Controller 2 is supplied with a remote control and an
external infrared eye which enables you to easily recall a number of standard programs or colours from the memory. The DecaLED® Controller 2 can of course also be controlled via DMX. For a professional connection of
the DMX signal there are 6 different lengths of XLR cabling available. We offer a range of accessories for the DecaLED® Controller 2, including starter cables, spare remote controls, a spare infra red eye, and the DecaLED® Setup Tool.
In addition to the DecaLED® Controller 2, we also offer another controller for 12VDC products. This is the DecaLED® Controller 2 Mini, which has 2 outputs for smaller installations that require a limited maximum load.
Product information:
Suitable for the following products:
- DecaLED® Flex RGB
- DecaLED® Flex RGB HD
- DecaLED® Flex SC
- DecaLED® RGB & SC Strip
- DecaLED® Dot
- DecaLED® Square
- DecaLED® IP Strip RGB & SC